For every man and woman, the wedding plays an important role in their life. Each people would have crossed their wedding or else neighbours’ wedding function. Before marriage still, some functions would be held. Engagement is the first procedure for marriage. The date for the marriage will be announced only in the engagement function. At the time of engaging function, both the couples would change a ring between them. The engagement ring has more value because it would the first function between the married couples. So the ring should be memorable till their life end.
Most people choose gold and wood ring for their son or daughter’s engagement function. Here we can see how the rings are made using mahogany wood by adding some rose gold in it.
Is it possible to make a bar of gold and a wood ring?
At first, make ready the necessary things to make the ring—first a single sheet of 0.7 miles thick and nine karats of rose gold. According to the size of the ring, the sheet can be adjusted. With the help of callipers, we can adjust the sheets as you needed. We cannot use all kinds of callipers to separate the sheet. Some callipers are designed especially for gold and smooth woods. After making some adjustments file the edge of the sheets to get a smooth surface.
How are the rings shaped?
- If the ring is particularly made for the engagement couples, jewellers would measure the size of their fingers. While adjusting the shape of the ring, there should not be any unwanted bending on the ringside. When the gold and wood ring is made first, the gold surface should be done properly, and then finally, wooden wrapping is done on the gold surface.
- To cover the surface of the rosewood ring, we can use the bed wood method. The thickness of the wood should be thin like paper only that we can able to wrap around the gold ring. It is not easy to bend the wooden part because, in some cases, it may break. So that before bending it, dunk the wooden piece in some water for more than 20 minutes. After minutes take it out and wrap it up by using a masking tape, but this process should be done only when the wooden piece got dry. By this process, we could make a fine round-shaped wooden piece. How much does the wood get thin? It might be easy to cover and fit the golden surface.
- Due to the less thickness, the wood can be pasted using strong glue. After pasting the glue surface, sand up the edges with the help of sandpaper. Here the wooden surface would protect the inner gold surface. While rounding the surface, the jeweller can make one or else two-layer of the wooden piece on the gold surface. And finally, if the customers wish to make some designs in the ring or else to write their name, we can design it using some writing machines. While making designs, the wooden piece should not be affected more. These are all the methods to make a fine wood and gold ring.